B/E 1300 Walking Dragline

Crack excavation found by Ultrasonic Testing under boom lacing cluster.

Big Muskie the worlds largest dragline bucket (no longer in operation).

Ultron technician checking Radiographic setup on upper end of upper suspension ropes.

Ultron technician performing Utrasonic Testing on a rotating swing shaft. You can see the track through the couplant. NOTE: the failure area is beneath the floor.

Cracks located in Hoist or Drag bull gear for the mining industry. Notice the only area cleaned is of the crack.

Ultron technician stands beside an underground mining longwall roof support shield. Inspection is completed in situ underground on the face, in predetermined cross cuts during moves, or on the surface.

Swing rack on a P&H 2800 shovel swing ring gear. Two tooth roots are cleaned with the cracks circled in white. No other cleaning was required.

Rotary kiln ring gear with cracks.

Cement kiln ring gear with cover removed.

Ultron performing Eddy Current testing on a finish mill bull gear for the cement industry.

Ultron technician performs an Eddy Current tooth root scan on a finish mill ring gear.

Eddy Current testing accessability of a SAG mill ring gear at a Canadian gold mine.

Fatigue crack in tooth root extending from a surface pit on a cement plant finish mill ring gear.

Ultron technician performs visual examination to collect pertinent information for the final report.

Informational training picture shows a paddle wheel open gear lubrication delivery system.

4 inch long crack in the tooth root on a SAG mill ring gear

Lime kiln cracks extending through the rim thickness.

Cement plant finish mill access area for Eddy Current testing.

Ultron techncian provides Ultrasonic Testing on a cement kiln trunnion shaft.